PROF. IR. DR. MOHAMMAD YEAKUB ALI

Office | 1A.57
Phone | +673 2461020 Ext 1225
Fax | +673 2461035/6
Email | yeakub.ali@utb.edu.bn

Professor | Group Leader: Design & Manufacture

Education

PhD. (Mech. Eng.): NTU, Singapore
M.Eng. (Manuf. Syst. Eng.): AIT, Bangkok
BSc. (Mech. Eng.): BUET, Dhaka
PG Diploma (Islamic Rev. Knowledge): IIUM, Malaysia

Professional Qualification

C Eng (IMechE, UK)
CP Eng (Engineers Australia)
P Eng (Malaysia)
P Eng (Bangladesh)
Fellow: The Institution of Engineers, Bangladesh (IEB)
Fellow: Bangladesh Society of Mechanical Engineers (BSME)
Member: American Society of Mechanical Engineers (ASME)
Member: Institution of Engineers Malaysia (IEM)
Member: Society of Engineering Education Malaysia (SEEM)

Experience

11 July 2019-Present: Professor
Group Leader: Design & Manufacture
Mechanical Engineering Programme Area
Faculty of Engineering, Universiti Teknologi Brunei

 

2011-2019: Professor
2007-2011: Associate Professor
2004-2007: Assistant Professor
Department of Manufacturing and Materials Engineering
Faculty of Engineering, International Islamic University Malaysia

2001–2004: Research Fellow
School of Mechanical and Aerospace Engineering
Nanyang Technological University, Singapore

2018-2018: Deputy Dean (PG)
Faculty of Engineering, International Islamic University Malaysia

2012-2016: Head of Department
Department of Manufacturing and Materials Engineering
Faculty of Engineering, International Islamic University Malaysia

 

Programme Review:

Mechanical Engineering, Dhaka University of Engineering and Technology
Business Administration: Asia Pacific University, Dhaka
Textile Engineering: Bangladesh University of Textiles
Textile Engineering: City University of Bangladesh

Editor-In-Chief:
International Journal of Engineering Materials and Manufacture

Editorial Board:
Heliyon

Current Teaching Module

  • Design Drafting & Manufacture

  • Group Design Project

  • Mechanics of Machines

  • Design of Machine Elements

  • Project and Operations Management

Research Interest:

Advanced Design Machining and Manufacture
Micromachining, Focused Ion Beam, MEMS
Engineering Project and Operations Management

 

Supervision:

PhD: 18
MEng: 18
FYP: 100

PhD Thesis Examiner: 10
PhD Comprehensive: 17
MEng Thesis Examiner: 13

 

Selected 5 Completed Research:

  1. Precision Control of Kerf in Micro wire Electro Discharge Machining With Dry Dielectric Fluid (MOSTI: RM157000, 2015-2019)
  2. Noble Approach to Control Vibration using Minimum Quantity Lubrication in MicroMilling (MOHE: FRGS 14-156-0397, RM116700, 2014-2019)
  3. Wear Resistance Enhancement of Wind Turbine Blade Materials Under Sand Impact (MOHE: FRGS 14-131-0372, RM66800, 2014-2016)
  4. Micro-Structuring of Nonconductive Ceramic Materials using Micro-EDM with Pyrolytic Carbon in Dielectric Fluid (MOSTI: 03-01-08-SF0135, RM182875, 2012-2014)
  5. Noble Tool Based Micromilling For Nanometric Surface Finish (MOHE: FRGS 0207-44, RM96000, 2007-2010

Selected 10 Recent Publication

  1. Chowdhury, A. G. K., Ali, M. Y., & Banu, A. (2020 March). Analysis of Corner Radius in Dry Micro WEDM. International Journal of Mechanical Engineering and Robotics Research. 9(2), in press.
  2. Muhammad Shaffiq, Mohammad Yeakub Ali, Banu, A. Rahman, M. A. and Chowdhury, M. S. H. (2019). Investigation of Vibration in Micromilling with MQL: S/N Ratio Analysis. International Journal of Recent Technology and Engineering, Accepted.
  3. Ali, M. Y., Banu, A., Shaffiq, M., Rahman, M. A., Konneh, M., & Salehan, M. (2019). Investigation of Taper Angle in Dry Micro Wire EDM. International Journal of Mechanical Engineering and Robotics Research. 8(5), 725-728.
  4. Banu, A., Ali, M. Y., Rahman, M. & Konneh, M. (2019). Investigation of Process Parameters for Stable Micro Dry Wire Electrical Discharge Machining. The International Journal of Advanced Manufacturing Technology, 103 (1-4), 723–741.
  5. Muataz H. F. Al Hazza, Nur A. I., Erry Y. T. A., Nor A. E., Ali, M. Y. (2019). Flexural Behaviour of Open-Cell Aluminium Foam Sandwich under Three-Point Bending. International Journal of Recent Technology and Engineering, 7(6S), 134-137.
  6. Jarin, S., Saleh, T., Muthalif, A. G., Ali, M. Y., & Bhuiyan, M. (2018). Towards Achieving Nanofinish on Silicon (Si) wafer by μ-wire Electro-discharge Machining. The International Journal of Advanced Manufacturing Technology, 99 (9-12), 3005-3015.
  7. Ali, M. Y., Banu, A., Salehan, M., Adesta, E. Y. T., Hazza, M., & Shaffiq, M. (2018). Dimensional Accuracy in Dry Micro Wire EDM. Journal of Mechanical Engineering and Sciences, 12 (1), 3321-3329
  8. Ali, M. Y., Sabur, A. & Maleque, M. A. (2018). Micro Electro Discharge Machining of Nonconductive Ceramic: The Issue of Spalling. International Journal of Engineering and Technology, 7(3.24), 32-39.
  9. Ali, M. Y., Banu, A., Rahman, M. A., Hazza, M., & Adesta, E. Y. T. (2018). Precision Control of Kerf in Metal Cutting using Dry Micro WEDM: Issues and Challenges. Key Engineering Materials. 775, 499-505.
  10. Ali, M. Y., Maleque, M. A., Banu, A., Sabur, A., & Sujan, D. (2018). Micro Electro Discharge Machining of Non-Conductive Ceramic. Materials Science Forum, 911, 20-27.

 

Close Menu